Conference paper All Open Access; Gold Open Access

Effect of Rod Diameter and Adhesive Thickness to the Pull-out Strength of Threaded Steel Rod Glued in Laminated Bamboo

M.D.K. Dewi, Karyadi, P.B. Susanto, Nindyawati

IOP Conference Series: Earth and Environmental Science , Vol. 832 (1) · 2021

4Citations
20Highest percentile
4Authors

Summary

Summary Effect of Rod Diameter and Adhesive Thickness to the Pull-out Strength of Threaded Steel Rod Glued in Laminated Bamboo
Key quote

The pull-out strength, shear strength, and slip modulus of glued-in threaded steel rods were found to be influenced by the rod diameter and adhesive thickness.

Dewi et al., 2021

Details

Abstract

The purpose of this study was to determine the effect of threaded steel rod diameter and adhesive thickness on pull-out strength, shear strength, slip modulus, and damage patterns of glued-in rod embedded in laminated bamboo. The shape of the specimen is a cube with the dimensions of 100mm × 100mm × 100mm made of laminated Asian Bamboo (Dendrocalamus asper). The threaded steel rod diameter consists of three sizes, namely 8mm, 10mm, and 12mm. Each threaded steel rod is embedded in laminated bamboo to a 40mm length. The epoxy brand Sikadur 372 is used as an adhesive between laminated bamboo and threaded steel rods with three variations of adhesive thickness, namely 2mm, 3mm, and 4mm. Each variation of the test object was repeated five times. The results showed that the rod diameter and adhesive thickness affect the pull-out strength, shear strength, and slip modulus. © Published under licence by IOP Publishing Ltd.

Affiliations

Department of Civil Engineering, Faculty of Engineering, Universitas Negeri Malang, Indonesia

IOP Publishing Ltd · ISSN 17551307