Conference paper All Open Access; Gold Open Access; Green Open Acce

Effects of Milling Time on Nano Rice Husk Ash Particle Size

Ibrahim Mohammed Nasser, Mohd Haziman Wan Ibrahim, Sharifah Salwa Mohd Zuki, Abdullah Faisal Alshalif, Nindyawati Nindyawati, Ramadhansyah Putra Jaya

E3S Web of Conferences , Vol. 445 · 2023

3Citations
23Highest percentile
6Authors

Summary

Summary Effects of Milling Time on Nano Rice Husk Ash Particle Size
Key quote

The optimal particle size of nRHA was achieved with 30 hours of grinding, reducing particle size from the initial 100 nm to 28 nm.

Nasser et al., 2023

Details

Abstract

This research focuses on the manufacture of nano Rice Husk Ash (nRHA) by ball milling technique and critically analyzes the effect of milling time on particle size. The process starts with collection of raw rice husk from a local rice mill factory, followed by controlled incineration at a temperature of 700 C for 5 hours to get the amorphous RHA. Finally, the nano RHA is prepared by subjecting the RHA to grinding for the different period like 10, 20, 30, and 40 hrs. The particle size was analyzed with FESEM, and it was found that particles got smaller as grinding proceeded, reaching an optimal size of 28 nm following 30 h grinding. Nonetheless, prolonged grinding resulted into particle agglomeration that was caused by Van der Waal forces. Therefore, these findings are significant in that they help to comprehend the morphology changes and particle size alterations in nRHA that may be applied for different uses such sustainable construction materials. © The Authors, published by EDP Sciences.

Affiliations

Jamilus Research Centre, Faculty of Civil Engineering & Built Environment, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia; Department of Civil Engineering and Planning, Faculty of Engineering, State University of Malang, Malang, Indonesia; Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Pahang, Kuantan, Malaysia

EDP Sciences · ISSN 25550403