Conference paper

The Effect of TiO2 on The Roughness of Milled Titanium with Vegetable Oil Cooling Media

Aminnudin Aminnudin, Yanuar Rohmad Aji Pradana, Andrean Syah Putra

AIP Conference Proceedings , Vol. 2991 (1) · 2024

0Citations
10Highest percentile
3Authors

Summary

Summary The Effect of TiO2 on The Roughness of Milled Titanium with Vegetable Oil Cooling Media
Key quote

The effect of TiO2 content on decreasing the surface roughness was observed in the milling experiments.

Aminnudin et al., 2024

Details

Abstract

The machining process using a milling machine on titanium requires a cooling media to cooling the cutting tool and workpiece. The application of cooling media from organic materials can reduce the use of synthetic oil as cooling media which is difficult to decompose naturally. Palm oil which is one of the most widely produced vegetable oils in Indonesia. The use of palm oil as a coolant has been widely carried out, to improve the performance of palm oil as a cooling media by increasing the ability of palm oil to absorb heat. In this research, TiO2 particles and solid lubricant were added. The milling process was carried out at 250, 370 and 600 rpm, while the TiO2 content was 0,25; 0,50 and 0,75 grams/100mL vegetable oil. The highest surface roughness occurred in a 0,05 grams TiO2 (0,585 µm), while the lowest occurred in a mixture of 0.1 gram of graphite at 0,338 µm. The effect of TiO2 content on decreasing the surface roughness. © 2024 American Institute of Physics Inc.. All rights reserved.

Affiliations

Department of Machine Technique, Universitas Negeri Malang, Jawa Timur, Malang City, 65145, Indonesia

American Institute of Physics · ISSN 0094243X