Article

Multiparameter Fiber Bragg Grating (FBG)-Based Sensor Fabricated Using 3-D Printing Technology for Precise Measurement of Vertical Earth and Pore Pressure

W.A.F.W. Burhanuddin, Harith Ahmad, M.A. Alias, M.S.M. Sa'Ad, Shufeng Sun, M.F. Ismail

IEEE Sensors Journal , Vol. 24 (16) · 2024

13Citations
88Highest percentile
6Authors

Summary

Summary Multiparameter Fiber Bragg Grating (FBG)-Based Sensor Fabricated Using 3-D Printing Technology for Precise Measurement of Vertical Earth and Pore Pressure
Key quote

The sensor demonstrated high sensitivity and linearity for pressure measurements, with effective temperature compensation.

Burhanuddin et al., 2024

Details

Abstract

This study proposes an innovative approach for fabricating a multiparameter sensor based on fiber Bragg gratings (FBGs) using 3-D printing technology. In this sensor design, three FBGs were used: one for vertical earth pressure measurement, FBG E; one for pore pressure measurement, FBG P; and the other for temperature compensation, FBG T. The results demonstrate the sensor's effectiveness in measuring vertical earth and pore pressure, achieving 43.1550 pm/psi sensitivities and 0.9841 pm/psi, respectively. Furthermore, FBG E and FBG P also exhibited high linearity values of 99.5% and 99.1%, respectively, demonstrating their ability to provide accurate measurements. Conducted measurements also showed FBG T's effectiveness in giving temperature compensation for FBG E and FBG P during pressure measurements. In addition, the study highlighted the suitability of acrylonitrile butadiene styrene (ABS) material for sensor design and prototyping due to its capability to withstand high temperatures and pressures, making it ideal for various applications in harsh environments. © 2001-2012 IEEE.

Affiliations

University of Malaya, Photonics Research Centre, Kuala Lumpur, 50603, Malaysia; University of Malaya, Photonics Research Centre, Faculty of Science, Department of Physics, Kuala Lumpur, 50603, Malaysia; Universitas Negeri Malang, Department of Physics, Malang, 65145, Indonesia; Qingdao University of Technology, Collaborative Innovation Center for Green Intelligent Laser Manufacturing Technology and Equipment of Shandong Province, School of Mechanical and Automotive Engineering, Qingdao, 266520, China

Institute of Electrical and Electronics Engineers Inc. · ISSN 1530437X